Learning marginal-cost pricing via a trial-and-error procedure with day-to-day flow dynamics

This paper investigates the convergence of the trial-and-error procedure to achieve the system optimum by incorporating the day-to-day evolution of traffic flows. The path flows are assumed to follow an ‘excess travel cost dynamics’ and evolve from disequilibrium states to the equilibrium day by day. This implies that the observed link flow pattern during the trial-and-error procedure is in disequilibrium. By making certain assumptions on the flow evolution dynamics, we prove that the trial-and-error procedure is capable of learning the system optimum link tolls without requiring explicit knowledge of the demand functions and flow evolution mechanism. A methodology is developed for updating the toll charges and choosing the inter-trial periods to ensure convergence of the iterative approach towards the system optimum. Numerical examples are given in support of the theoretical findings.     

基于CAD2AME的飞机液压系统流阻计算方法

飞机液压系统包含泵源系统、管路系统、附件和用户系统,飞机管路系统是飞机泵源和用户之间的纽带,液压管路流阻特性决定了用户系统入口的压力和流量,影响用户动静态响应性能,特别是对一些伺服作动系统。传统流阻特性计算方法主要针对稳态工况计算,难以实现动态响应计算,且对工作人员要求高、计算工作量大。随着全三维设计应用于飞机液压管路系统设计制造,为基于计算机的流阻特性仿真分析提供了可能。本文介绍和对比了三种计算方法,选取了较优的CAD2AME方法对某飞机局部液压管路系统流阻特性进行仿真分析,证明该方法可快速准确的对飞机液压管路进行分析。     

哈牡线季节性冻土接触网基础处理措施探讨

针对哈尔滨至牡丹江电气化改造工程季节性冻土分布的实际工程特点,结合季节性冻土条件下接触网基础的设计理念,对本项目选用的扩大型钢柱基础和不带扩底的拉线基础进行切向冻胀应力计算分析,并考虑影响切向冻胀力的水分、土质、负温以及基础侧表面的粗糙度等主要因素,提出了对钢柱基础采用换填加扩大型基础的处理措施,对接触网的下锚拉线基础提出了换填及加大埋深等防冻胀处理措施以抵抗季节性冻土的上拔力。     

凝水泵出口压力波动问题机理研究

针对某凝给水系统部分工况下出现的凝水泵出口压力波动问题开展相关研究工作,通过调研系统实际运行参数,采用数值仿真和理论计算进行分析,推导系统汽蚀余量特性方程,获取系统参数对凝水泵运行情况边界条件的影响,进而获取导致凝水泵出口压力波动的原因,并提出相应的控制措施。     

太阳能游船光伏逆变器控制系统EMC设计

从船舶环境和光伏逆变器的基本原理和功能出发,分别对太阳能游船EMC干扰源和干扰路径进行分析,通过信号滤波与保护、工艺设计和试验测试,实现高可靠性的太阳能游船光伏逆变器控制系统研究和设计,为太阳能游船的光伏逆变器控制系统研究提供基本EMC设计思路与实现技巧。     

某船用柴油机SCR尿素喷射系统结构参数仿真优化

在建立的SCR系统三维仿真模型基础上,首先通过仿真性能分析,初步确定了尿素喷嘴位置、喷孔直径、喷孔数目及喷射方向等尿素喷射结构参数范围,然后采用正交试验法确定尿素喷射结构参数仿真试验方案。以NO_X转化率为优化目标,通过极差分析和方差分析得到优化的尿素喷射结构参数方案为:喷嘴与催化剂入口距离为7倍管径,喷嘴孔数为6孔,喷嘴孔径为0.6 mm,喷射锥角为30°。     

Spar基础浮式风机系泊系统全耦合分析

本文以OC3 Hywind Spar基础浮式风机为研究对象,采用先进的空气动力-水动力耦合时域分析方法,针对其在中国南海某海域风浪流共同作用下,系泊系统、浮式基础运动以及风机与塔桶载荷响应进行分析。对比了定常风与湍流风模型对浮式风机系泊系统、整体运动响应以及风机载荷的影响。计算结果表明：相比于湍流风,采用定常风进行浮式风机系泊系统分析将得到偏于危险的结果,同时浮式风机运动响应与风机载荷结果偏小。本文建议在系泊系统初始设计阶段采用定常风方法进行设计,在系泊分析阶段采用湍流风进行分析,以保证浮式风机长期服役安全。     

载人潜器人因工程研究

对载人潜器人因工程的研究现状、研究范畴、技术手段和发展趋势进行梳理和总结,旨在为指导载人潜器设计总体集成优化、提高潜器综合效能、节省全寿命周期费用及缩减潜器人员编制提供参考。     

Nonlinear pricing in linear cities with elastic demands

Nonlinear road pricing charges each traveler based on his/her trip’s corresponding particular attribute level. In order to help authorities in designing road pricing systems at a strategic level, this paper attempts to address two fundamental questions: (i) what is the value of pricing’s nonlinearity for mitigating traffic congestion? (ii) if a nonlinear toll function is implemented, should it be convex, concave or other shape? Specifically, we consider distance-based pricing in linear cities. For linear monocentric cities with heterogeneous travelers, we show that the system optimal distance-based pricing indeed exhibits nonlinearity. It is proved that: (i) the cost-based system optimal toll function is monotonically increasing and concave with respect to the traveled distance; (ii) the time-based system optimal toll function always exists and is unique. If the initial proportion of each traveler group is invariant along a corridor and the demand function is of exponential type, then the time-based system optimal toll function enables the travelers, living further away from a city center, to face a lower toll level per unit distance. For a linear polycentric city, we demonstrate: (i) there always exists the system optimal differentiated (in terms of city centers) toll functions; (ii) it is highly possible that the system optimal non-differentiated toll function does not exist. Hence, we further propose an optimal toll design model, prove the Lipschitz continuity of its objective and adopt a global-optimization algorithm to solve it.     

燃气轮机的大型集装箱船LNG燃料舱布置

为了满足环保新法规要求，很多船东首选LNG作为船用燃料。本文基于燃气轮机推进的大型集装箱船的布置特点及IGF规则的要求，对LNG燃料舱布置的位置和LNG燃料舱适用的形式进行了论证，获得了满足大型集装箱船性能需求和IGF规则要求的LNG燃料舱设计方案。